three Kinds of UV DTF Transfer Printer Common Failure,Easy to Solve!

three Kinds of UV DTF Transfer Printer Common Failure,Easy to Solve!

Blog Article

Since the listing, the UV DTF Transfer Printer with its small footprint, top printing results, vast vary of printing and different benefits in a quantity of fields have been used, liked by using the printing business. However, in the day by day use of UV printers, will inevitably come across some troubles or failures, in the cease how to solve?
UV printer ink break
Failure phenomenon: UV printer in the procedure of printing patterns, man or woman nozzles out of ink, ensuing in the lack of coloration on the floor of the print.

Reason analysis: nozzle channel blockage, ink tablet blockage, terrible ink quality, nozzle working voltage is now not set properly.

Solution:
Use cleansing fluid to flush the nozzle holes, or use ultrasonic cleansing nozzle, unclogging the blocked nozzle;
Replace the superb ink to keep away from the printhead blocked again;
Adjust the printhead running voltage, till the UV printer no longer show up damaged ink phenomenon.
Printing method ink drops
Failure phenomenon: UV printing process, the printhead all at once dripping ink, ensuing in ink spots on the screen.

Reason analysis: terrible strain is too low, the ink machine leakage, rubber ring dirty, too a good deal ink in the ink cartridge

Solution:
Check whether or not the bad strain is too low, and alter to the nation of non-dripping ink;
Check the articulation of the ink circuit machine to see if there is air leakage;
Clean the rubber ring and substitute the historical rubber ring in time to make certain right sealing;
Check whether or not the ink content material in the exterior cartridge is too much.